23
8.3.4 AUTO WHITE BALANCE Setup:
AUTO WHITE BALANCE
MODE
DEFAULT
RETURN
ATW
(1) AWB MODE:
This function is used for changing the WB mode.
Set the mode to
ATW*
, Indoor, Outdoor, Manual, Push Lock,
Anti-CR.
ATW: WB color temperature range = 2500°K ~ 8000°K.
Manual WB: Adjust Red and Blue gain to perform a desired White
Balance.
PUSH LOCK Set the WB mode to Push Lock
Anti-CR: Set the WB mode to Anti-CR. WB color temperature range =
3800°K~6000°K.
Sub menu of Manual> mode could be set the following parameters.
R GAIN (Red Gain)
This function is valid only when WB MODE is set to MANUAL.
Adjust the level from 0 to 255 (Default Setup:
0*
).
B GAIN (Blue Gain)
This function is valid only when WB MODE is set to MANUAL.
Adjust the level from 0 to 255 (Default Setup:
0*
).
(2) PUSH LOCK:
This function is valid only when WB MODE is set to PUSH LOCK.
Enable this mode to perform auto tracing action. Disable this mode
to preserve the final auto tracing action.
(3) DEFAULT:
If default is entered, all AWB function will be changed to the factory
default setting.
(4) RETURN:
Exit the AWB setup menu and return to the main menu.
Summary of Contents for EFFIO-P
Page 65: ...64 MEMO...
