Epcom EFFIO-P, User Manual

Page: 28 / 65

27
(4) POSI/ NEGA

This mode is used for changing the color and luminance to negative.

Select the mode NEGA or POSI* .
(5) MIRROR

This function allows mirroring the image vertically, horizontally, or
both.

Select the mode OFF*, V-FLIP, H-FLIP, or HV-FLIP.
(6) FREEZE

This function allows freezing the screen.

Select the mode ON, OFF*.
(7) SYNC:

Under the LL mode, the AC power supply and VD signals of the
camera are synchronized (V-PLL). The frequency of the power
supply which can be used by the LL mode is 60Hz applying NTSC
system and 50 Hz applying PAL system.

Select the mode LL/ INT*.
< Note >
1. When the power is DC 12V, the SYNC menu is fixed to the INT mode
(cannot be switched to Line Lock mode.).
2. When switched to Line Lock mode, use “SHIFT UP” and “SHIFT
DOWN” to adjust the phase of the VD, and after adjusting to the new VD
phase it will be switched to OFF.
(8) WPC

This function detects during normal shooting the white pixels which
arise after shipment from the factory and which have not been
registered by the static detection function, and it provides
compensation with no limits set on the number of white pixels.

Select the mode ON, OFF*.
(9) IRIS ADJ
When replacing the lens, face the camera toward the light, and then start the
option “ADJ”. Message “Wait…” means that adjustment is in progress,
about 40 seconds afterward a message “Success!!” appears indicates that
the adjustment has been completed. When the message “Time Out” or
“ADJ ERR” appears indicates that the adjustment has failed.
(10) LANGUAGE:

This function allows changing the language of OSD.

Select the mode ENGLISH,
简体
中文
, or
繁體中文
.