39
Key Action
Perform the Key action according to the data of "KEY_NUM".
Caution: After using the Key action, the camera has to be notified by the
key action code KEY_NUM = “KN_STOP“.
PC
→
Camera
0xC5 0x5F KEY_NUM 0x00 CAM_ID C.S.
Camera
→
PC
0xC5 0x5F KEY_NUM 0x00 KEY_NUM 0xXX 0xXX 0xXX C.S.
KEY_NUM: This is a Key code value for operation (Refer to 7.3 Key Code
Table).
Changing CAM ID
Change the data of CAM_ID to “NEW_C_ID“ and Camera ID mode.
PC
→
Camera
0xC5 0x78 NEW_C_ID On/Off CAM_ID C.S.
Camera
→
PC
0xC5 0x78 NEW_C_ID On/Off NEW_C_ID 0xXX 0xXX 0xXX C.S.
1.
NEW_C_ID: New data to change Camera ID.
2.
On/Off: Setting the Camera ID mode to “On” or “Off”.
If On/Off = “0x00”, the Camera ID mode becomes “OFF” mode. In
this case, we may ignore “CAM_ID” value. Otherwise, the Camera ID
mode becomes “ON” mode. Then, the value of CAM_ID is changed to
“NEW_C_ID”.
CAM ID Read
Read the data of Camera ‘s ID.
Caution: This command may only be used in condition of one by one connection
(PC vs. CAMERA).
PC
→
Camera
0xC5 0xCC 0x00 0x00 CAM_ID C.S.
Camera
→
PC
0xC5 0xCC 0x00 0x00 CAM_ID On/Off 0xXX 0xXX C.S.
1.
CAM_ID: The Camera ID data of a CAMERA.
2.
On/Off: The On/Off mode of the camera ID.
0x00: Camera ID is “OFF” mode.
0xFF: Camera ID is “ON” mode.
Summary of Contents for EFFIO-P
Page 65: ...64 MEMO...
