REV. 08/2019
1
B
B Truck Description
Application
The truck is an electric one which is designed to transport and pick goods on level ground.
Small items can be placed and carried on the storage table. The low overall height and
platform height allow it to be driven through doorways. In the raised position, a pressure-
sensitive switch monitors the area between the drive system and the operator platform. If the
area is occupied(e.g.by an object or person), lowering is stopped.The low net weight means.
that it can travel on lifts.
The rated capacity is indicated on the data plate.
Operation only on paved level ground with sufficient load-bearing capacity
，
permissible
ground tilt cannot exceed 0.5°
。
Do not exceed the permissible surface and spot load limits on the travel paths.
Operation only on travel paths that are visible and approved by the operating company.
Travel with the load facing uphill.
1.1
Functional Description
Safety mechanisms
The truck geometry with rounded edges ensures safe handling of the truck. Pressing the
Emergency stop switch disconnects all electrical functions in hazardous situations. Opening
the gates will interrupt all driving and lifting / lowering operations except mechanical
emergency lowering of the platform. Before you can drive or lift the dead man switch must be
operated.
If the platform is lifted, the area under the platfom is checked by sensor switches to prevent
any movement if an object or person is detected in that area.
Both hands must be at the control handles for driving and lifting to prevent injury of hands
sticking out.
Drive
The entire drive unit is enclosed in the truck chassis.
The electronic traction controller ensures the smooth driving operation of the drive motor and
powerful acceleration.
Brake system
The operator can brake gently and wear-free by pulling back the travel control button. The
electromagnetic spring pressure brake acting on the drive motor serves as both parking and
handbrake. Without electric power the springs will engage the brake.
Steering system
The steering controller is monitoring permanently the position of the steering wheel. In case
of error the truck is stopped immediately. The steering angle is shown on the display. The
maximum steering angle is±90°.
1.2
•
•
•
•
•
Summary of Contents for JX0-30
