EP Equipment JX0-30, Operation Manual

Page: 58 / 74

REV. 08/2019
3
G
Maintenance interval
●
W A B C
Brake Check magnetic brake air gap. ●
Electrics Test instruments, displays and control switches. ●
Test warning and safety device.
●
Make sure wire connections are secure and check for
damage.
●
Test micro switch setting. ●
Check contactors and relays. ●
Fix the motor and cable ●
Power supply Visually inspect battery ●
Visually inspect battery plug. ●
Check battery cable connections are secure, grease
terminals if necessary.
●
Travel Check the transmission for noise and leakage. ●
Check travel mechanism, adjust and lubricate if
necessary.
●
Check wheels for wear and damage.
●
Check wheel suspension and attachments ●
Check drive support plate.
truck
frame
Check chassis for damage. ●
Check labels.
Check mast attachment.
Check screw connections.
Check gates and panels are secure and free of
damage.
Hydraulic
operations
Test hydraulic system. ●
Check that hose and pipe lines and their connections
are secure, check for leaks and damage.
●
Check cylinders and piston rods for damage and leaks,
and make sure they are secure.
●
Check hydraulic oil level. ●
Replace hydraulic oil. ●
Check and clean hydraulic oil filter. Replace it if
necessary.
●
Lifting Check lifting chains and chain guides for wear, adjust
and
●
Check Storage table and Pallet for wear and damage. ●
Perform sight check of rollers, sliding elements, and
stops
●
Steering
system
Test electric steering. ●
Check steering toothing for wear and lubricate. ●
Lubrication Grease the vehicle in accordance with the lubrication
schedule.
●
1.3.1Maintenance Checklist
The chain on the mast has to be changed after 3000 hours' or 3 years' usage.