REV. 08/2019
1
E
E Operation
Safety Regulations for the Operation of truck
Operator training
The truck must only be operated by persons who have been trained in the operation of
trucks, who have demonstrated to the owner or his representative their capability of moving
and handling loads, and who have expressly been charged by the user or his representative
with the operation of the truck.
Rights, duties and conduct of the driver
The driver must be: informed of his rights and duties; trained in the operation of the truck;
and familiar with the contents of these operation manual. All necessary rights must be
granted to him.
Unauthorized Use of truck
The driver is responsible for the truck during the time it is in use. He shall prevent unauthorized
persons from driving or operating the truck. It is forbidden to carry passengers or lift
personnel.
Repairs
Without specific training and expressed authorization, the driver is not allowed to perform
any repairs or modifications on the truck. Under no circumstances must the driver change
the setting of switches or safety installations or render them ineffective.
Safety devices and warning labels
The safety devices, warning signs and warning instructions in the present operating
instructions must be strictly observed.
Hazardous area: A hazardous area is defined as the area in which a person is at risk due
to truck movement, lifting operations, the storage table (attachments) or the load itself. This
also includes areas which can be reached by falling loads or lowering operating equipment.
The driver must give a warning signal whenever a situation presenting danger to persons
might develop.
Unauthorized persons must be kept away from the hazardous area.
Where there is danger to personnel, a warning must be sounded with sufficient notice.
If unauthorized personnel are still within the hazardous area the truck shall be brought to a
halt immediately.
Run the truck
Checks and operations to be performed before starting daily work.
1.1
•
•
•
1.2
Summary of Contents for JX0-30
