REV. 08/2019
4
E
Start of the tuck to drive
Close the safety gates.
Insert the key in the key switch(5) and turn it to
the “ON” position .
Pull up the emergency stop switch(3) .
Apply the drive deadman switch(2).
Left hand in sensor switch(6) position.
Right hand in sensor switch(7) position.
Use the travel switch (4) to select the required
driving direction.
Forward = F.
Reverse = R .
The travel speed is governed by the speed
mode .
When the truck is switched on, the controller
will do a self-test. Make sure the lamps on the
display unit stop flashing before operation.
WARNING
•
•
•
•
•
•
•
•
•
The trucks must be started up in sequence,
otherwise the trucks can not run normally.The
blue lamp will always be on when the truck
driving. Driving lamp will flash red when driving.
WARNING
1.3.3
i
NOTE
If you wear very black jacket or gloves, the
sensor switch may not recognize the the arm
and stop driving. Please use slightly lighter
clothes and try again.
Summary of Contents for JX0-30
