EP Equipment 508000003143 Operation Manual Download Page 41

Page: 41 / 91

• Carefully open the cover (2) up.

Replacing the drive wheel

The drive wheel must only be replaced by authorized service personnel.

Check the hydraulic oil level

It is going to add hydraulic oil when you heard explosion sound from pipe during

lifting.

• Prepare the truck for maintenance and

repairs

( See 5.3.3 Maintenance Instructions

Page30).

• Opening the cover.
• Add hydraulic oil of the correct grade ( See 5.3.2 Lubrication Schedule P29) .

Add hydraulic oil till you cant hear explosion sound during lifting.
Installation is the reverse order.

Checking electrical fuses

• Prepare the stacker for maintenance and repairs
(See 5.3.3 Maintenance Instructions Page30).
• Open the cover.
• Check rating of all fuses in accordance with table,
replace if necessary.

Item

To protect:

Rating

Traction / Lift / Steer motor Fuse

200A

Controller Fuse

10A

5.3.4 Recommissioning

The truck may only be recommissioned after cleaning or repair work, once the
following operations have been performed.
• Test horn.

Warning!

Forbid adding hydraulic oil within
impurity.

Summary of Contents for 508000003143




























































































Search results

Summary of Contents for 508000003143

Reviews:

Related manuals for 508000003143

Brands by name

Popular brands

EP Equipment 508000003143, Operation Manual

Search results

Summary of Contents for 508000003143

Reviews:

Related manuals for 508000003143

Brands by name

Popular brands