EP Equipment 508000003143, Operation Manual, Page: 26 / 91

19
Do not drive the truck unless the panels are closed and properly locked.
When you start up the truck the drive pedal must be applied.
1.Driving
• Close the safety gates.
• Insert the key in the key switch(5) and
turn it to the “ON” position .
• Pull up the emergency stop switch(3) .
• Apply the drive pedal(2).
• Use the travel switch (4) to select the
required driving direction.
Forward = V.
Backward = R .
• The travel speed is governed by the speed mode .
• Use steering wheel (1) to steer the truck in the required direction.
Warning!
When the circuit is switched on, the
vehicle will have a self-test process.Make
sure the lamps on the display unit stop
flashing before operation.