16
Call 1300 369 273
www.enware.com.au
USER GUIDE
ON DEMAND SENSOR
ESQX™
ON DEMAND SENSOR
TO TURN ON
Place hand in front of sensor for 1 second
at a distance of 10cm. Water starts to flow.
TO TURN OFF
Place hand in front of sensor for 1 second
at a distance of 10cm. Water flow stops.
∙
After turning ON, the tap runs for at least 4 seconds.
(Intelligent Afterflow Function).
∙
During this time the tap cannot be turned off.
∙
If tap is not turned OFF, it will automatically turn OFF after
a set period. (Factory default setting is 15 sec, range 8 sec -
180 sec).
∙
If optional 15 sec Lockout Time Function is set: after turning
OFF the tap cannot be turned ON again for 15 seconds.
USING THE SENSOR
10 cm
10 cm
1 sec
Wave quickly in front of sensor
(does not activate)
Place hand in front of sensor at
10cm for 1 sec
Hand too close to sensor
(does not activate)
Move hand in towards sensor and
pulling up