D4K Pro® User Manual
D4K_UserManual_v1.3_EN.docx, 2021-02-12
Page 23 of 52
7.7.4
Supported Clients for iOS
VNC Viewer
Put the IP address and the connection name into the highlighted boxes.
→ The control screen appears.
→ Proceed working on the printer.
7.8
Set and Reset a Password for the VNC client
NOTICE
This function can only be used in service mode.
If necessary, it is possible to set a password for VNC client. To do this, tap the
VNC Password
tab on the screen of the Control
Soft after entering service mode. In the same dialog screen, you can reset an already set password.
Set a Password
To set a password, take the following steps:
1. Enter your password in the
Password
field.
2. Tap
[SAVE]
.
3. Restart the printer to apply new settings.
Reset a Password
To reset a set password, take the following steps:
1. Tap
[Reset Password]
.
2. Enter your new password in the
Password
field.
3.
Tap
[
SAVE]
.
4. Restart the printer to apply new settings.
