29
The [ I ] key can be used to call up an information
window, in which the raw value, temperature and
status of the sensors can be checked.
If any data has been changed, the change will only be
taken into account when you exit the complete menu
structure and answer [ Yes ] when asked if you wish
to save the changes.
For reasons of simplicity, a further display menu screen has been dispensed with.
The display screens are directly derived from the menu structure in section 7.
Protection against unauthorised use:
If a password has been entered in menu
7. System
in
7.6 Password
, which is different to the
“0000” default setting, you will be asked to enter a password when attempting to access
the menus. After the password has been successfully entered, the menus will be unlocked for
approx. 5 minutes (from the last menu entry).
Save changes?
Y
N
Sensor status
Temp Raw value
Stat
S1
63.0 0.000123 OK
S2 63.0 0.000213 OK