
15
16
H OFF DEL
It is the delay time for the high voltage alarm to deactivate. The value is entered as seconds. It can be
entered between 000.0 and 999.9 seconds.
H OFF DEL
H OFF DEL
SET
SET
SET
H OFF DEL
H OFF DEL
50.0
005.
005.0
050.0
LOW ALARM
LOW VALUE
The lowest value that you want the measured voltage to reach is entered in this menu. A value between
-200 and 200 can be entered. If the value is entered as 0 (zero), low alarm is deactivated.
LOW HYS
Return value (to the normal operation) from the low voltage fault which is the hysteresis voltage value
is entered in this menu. A value between 0 and 100 can be entered.
L ON DEL
It is the delay time for the low voltage alarm to activate. The value is entered as seconds. It can be
entered between 000.0 and 999.9 seconds.
L OFF DEL
It is the delay time for the low voltage alarm to deactivate. The value is entered as seconds. It can be
entered between 000.0 and 999.9 seconds.
TRIP
If the measured voltage value becomes more than 1.5 times of set maximum voltage value when the
TRIP
function is selected as
YES
, related alarm contact will open without a delay. In this case, up
segment on the LCD and the dot in the C1 segment turn on. If the measured voltage value becomes less
than 0.5 times of set minimum voltage value, related alarm contact will open without a delay. In this case,
down segment on the LCD and the dot in the C1 segment turn on.
LOW VALUE
00
LOW VALUE
SET
05
050
SET
SET
100
LOW VALUE
LOW VALUE
V
V
LOW HYS
50
LOW HYS
SET
03
030
SET
SET
050
LOW HYS
LOW HYS
V
V
L ON DEL
L ON DEL
SET
SET
SET
L ON DEL
L ON DEL
50.0
005.
005.0
050.0
L OFF DEL
L OFF DEL
SET
SET
SET
L OFF DEL
L OFF DEL
50.0
005.
005.0
050.0