Entes DCV-10, User Manual, Page: 7 / 28

11 12
“ALARM1”Alarm 1 Setting Menu
Operating mode of the relay on the device and the parameter according to that operating mode is set
in this menu. All settings belonging to 1. Alarm relay is done in this menu. Settings belonging to 2.
Alarm relay can be done in
“ALARM2”
menu. This menu has 1 sub-menu.
ALARM 1 SET ALRM STAT BACK MENU
SET
“ALRM TYPE” Alarm Type Setting Menu
Operating mode of the alarm is set in this menu. Alarm has 3 operating modes which are High, Low and
Range (High-Low).
ALRM TYPE
ALRM TYPE
SET
HIGH
ALRM TYPE
LO
SET
CONTCT POS
SET
OFF
CONTCT POS
CONTCT POS
ON
SET
ALRM STAT SET
SET
SET
OFF
ALRM STAT
CONTCT POS
OFF
ALRM TYPE
HIGH
BACK MENU
SET
"ALRM STAT" Alarm Status Setting Menu
Alarm function of the relay is activated in this menu. If "OFF" option is selected in this menu, alarm
parameters of the corresponding relay can’t be accessed. If the alarm function will be used, "ALRM
STAT" option must be set as "ON" in this menu. When alarm status is set as “ON”, the 2 sub-menus
of this menu become accessible. These menus are "CONTCT POS" and "ALRM TYPE" menus.
“CONTCT POS” Contact Position Setting Menu
The starting position of the alarm relay output is set in this menu. If this option is selected as “OFF”,
contact output starts as open when there isn’t a fault condition. If this option is selected as “ON”, contact
output will be closed when there isn’t a fault condition. It is set “OFF” as factory default.