
5
6
1.3 FRONT PANEL
The device has a back-lit 2.5 LCD which contains two lines as numeric and alpha-numeric, warning
symbols and notification signs. There are three buttons for programming the device. Explanations
about the display and buttons are listed on the right side.
DC VOLTMETER
C1
C2
Rx/Tx
%
PASSWORD
88888
V
DCV-10S
4
5
6
8
1
2
3
9
7
10
11
12
14
13 15
Usage of Front Panel and Buttons
1. Up button
2. Set button, for entry to menu and value entry
3. Down button
4. Indicates that the password protection is active.
5. Indicates the existence of communication. It blinks during communication. (DCV-10S/10CS/11S/11CS)
6. The line where measured parameters are displayed.
7. Indicates the direction of the measured voltage.
8. Indicates the notification messages or the menu where the user is.
9. Units belonging to measurements and analog output parameters.
10. Indicates that the contact or contacts are in a high fault state. When entering a value in High Alarm type,
it lights up continuously. When entering a low value for Range Alarm type, it lights up continuously and
when entering a high value for Range Alarm type, it blinks.(DCV-10C/10CS/11C/11CS)
11. Indicates that the contact or contacts are in a low fault state. When entering a value in Low Alarm type,
it lights up continuously. When entering a high value for Range Alarm type, it lights up continuously and
when entering a low value for Range Alarm type, it blinks.(DCV-10C/10CS/11C/11CS)
12. 1st Contact Output (DCV-10C/10CS/11C/11CS)
13. 2nd Contact Output (DCV-10C/10CS/11C/11CS)
14.15. Indicates that the contacts are closed.(DCV -10C/10CS/11C/11CS)