12
RAK133_ENG / © Ensto 2019
5.5. Ground Mounting on Unimi Concrete Foundation
This installation example describes the installation procedure using a concrete foundation
supplied by Unimi - Solutions.
Items needed:
Ground mounting pole EVTL43.0E
1 pcs (1 x EVB) /
2 pcs (2 x EVB)
Please order the following items from
www.unimi.se
Concrete foundation
1 pcs
Cover
plate
1 pcs
Adapter for 1 x EVB, product code US7650
1 pcs
Adapter for 2 x EVB, product code US27657
1 pcs
Note! When using the adapter for two Wallboxes (US27657),
you can get up to four charging outlets.
Installation steps
1. Dig holes for cable conduits and the concrete foundation to necessary depths.
2. Adjust the depth of the hole so that the top of the foundation will be in level with the
surrounding ground surface. Note! Consider the possible paving materials when setting
the level.
3. Cover the unused conduit openings with plugs, which are included in the foundation de-
livery.
4. Lift the foundation into the installation hole, the attachment bar embedded in the foun-
dation can be used as a lifting point. The attachment bar should be oriented to allow
attachment of the Wallbox into desired position.
5. Lay the cable conduits into the trenches and install conduits to relevant inlets.
Ø115 (x4)
250
395
450
600
Ø15
