10
RAK133_ENG / © Ensto 2019
5.3. Ground Mounting on Concrete Casting with Ground Mounting Pole
Items needed:
Ground mounting pole EVTL43.0E
1 pcs
Anchor
bolts
M12
4
pcs
Washers
Nuts
Make sure that the materials used for the concrete casting and the installation procedures fol
-
low local building regulations and safety standards.
•
Dig a pit for the concrete casting. The pit floor should be trampled and horizontal.
•
Put cable and possible drain pipes in place.
•
Fill the pit with concrete.
•
Let the concrete solidify, make sure that the surface stays solid and level during the pro-
cess.
Installation steps
1. Make sure that the concrete surface is flat and
level.
2. Drill a hole in the concrete for the anchor bolts.
For more information, please see the anchor
bolt instructions.
3. Put anchor bolts in place.
4. Pull the electric cables approx. 1500 mm measured
from the concrete surface.
5. Fix the ground mounting pole on the anchor bolts
with washers and nuts.
6. Pull the electric cables through the ground mount-
ing pole.
7. Attach the Wallbox on the mounting pole. See in-
structions on page 14.
200
100
