ENPC EP-PV12, User Manual

Page: 26 / 53

This 2-pin connector connects to the case-mounted speaker.
10. CPU Cooling Fan Connector (JP10)
This connector supports a CPU cooling fan of 500mAmp.
(6Watt) or less. Orient the fan so that the heat sink fins
allow airflow to go across the onboard heat sink(s)
instead of the expansion slots. Depending on the fan
manufacturer, the wiring and plug may be different. The
red wire should be positive, while the black should be
ground. Connect the fan’s plug to the board taking into
consideration the polarity of the connector.
NOTE: The CPU and/or motherboard will overheat if
there is no airflow across the CPU and onboard heat
sinks. Damage may occur to the motherboard and/or the
CPU fan if these pins are incorrectly used. These are not
jumpers, do not place jumper caps over these pins.
2. INSTALLATION
2-7 External Connectors (Continue…)
11. IrDA-Compliant Infrared Module Connector
JP10 : CPU Cooling Fan
Connector
JP9 (pin14, pin20):
Speaker Connector
         
         
+


1 GND
+12V
1
EP-PV12 User’s Manual 21