2. INSTALLATION
2-4
System Memories
This motherboard supports four 72-pin SIMMs (Single
Inline Memory Modules) of 4MB, 8MB, 16MB, 32MB,
64MB to form a memory size between 8MB to 128MB.
The DRAM can be either 60ns or 70ns Fast Page Mode
(FPM, Asymmetric or Symmetric), or Extended Data
Output (EDO). SIMMs must be installed in pairs so that
each bank contains two of the same size memory modules.
Install memory in any or all of the banks an any
combination as follows:
Bank
Memory Module
Total
Memory
Bank0
SIMM Slots 1&2
4/8/16/32MB
72-pin FPM, EDO
SIMMs
x 2
Bank1
SIMM Slots 3&4
4/8/16/32MB
72-pin FPM, EDO SIMMs
x 2
Total System Memory =
NOTE: Each bank must have the same size and type
(FPM, EDO, BEDO) of memory installed in pairs.
Memory setup is required “Auto Configuration” in
Chipset Features Setup of the BIOS Software section.
EP-PV12 User’s Manual
9
