ENPC EP-PV12, User Manual

Page: 22 / 53

2-7 External Connectors (Continue…)
5. AT Power Connector (12-pin block, J3)
NOTE: To prevent electrical spikes, make sure that the
power supply is not connected to an outlet when making or
removing connections. Power supplies contain power
reserves which can damage electrical components.
6. Floppy Drive Connector (34-pin block, J6)
This connector supports the provided floppy drive ribbon cable.
After connecting the single end to the board, connect the
two plugs on the other end to one or two floppy drives.
2. INSTALLATION
2-7 External Connectors (Continue…)
7. Primary/Secondary IDE connectors
J3: AT Power
Connector
J6: Floppy Drive Connector












1
                 
                 
1
+5V
+5V
<->5V
GND
<->12V
+12V
+5V
+5V
PG
EP-PV12 User’s Manual 17