FCC C
omplianCe
n
otiCe
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
Unauthorized changes or modification to this system can void
the user’s authority to operate this equipment.
If your Low Vision device has an option to connect to a TV,
it must be used with shielded interface cables in order to
meet FCC emissions limits for Class B digital devices. It is the
responsibility of the user to use the shielded interface cables
supplied with the equipment.
FCC COMplianCe nOtiCe
Congratulations on your purchase of the USB
Bridge from Enhanced Vision. The USB Bridge is
a very useful accessory to be used in conjunction
with your Enhanced Vision product(s). When used
along with the Acrobat™, Flipper™ or Max™, the
USB Bridge provides an all-in-one solution, bringing
both computer connectivity and portability for these
devices.
The USB Bridge serves as a central hub for
connecting your Enhanced Vision product to your
laptop or desktop PC using a standard, USB cable.
Featuring a built-in computer interface and included
software, the USB Bridge allows you to use your
PC while simultaneously viewing magnified, camera
based images on a single display. Built-in software
controls allow you to dynamically re-size the camera’s
display window on your desktop to either full or “split-
screen” modes to best suit your particular viewing
needs. The still-image snapshot feature allows you
to capture magnified, camera-based images on your
PC for later recall, making the USB Bridge an ideal
solution for students and working professionals.
Last but not least, the USB Bridge supplies power
to your Enhanced Vision product via the included
Lithium battery, providing two or more hours of
portable use on a single charge. The built in battery
charger (and included power supply) completes the
package, offering a convenient and fully integrated
“on-the-go” solution for people with low vision.
Summary of Contents for USB Bridge
Page 1: ...Users Manual ...
