ENHANCED VISION USB Bridge, User Manual

Page: 5 / 20

8 9
C
hapter
3
S
aFety
p
reCautionS
C
hapter
4 pa
Ckage
C
ontentS
& C
ontrolS
All required accessories for operation are included
inside your USB Bridge package. The USB Bridge
includes the following items:
1) USB Bridge
2) power Supply
3) USB Cable
(Type “A” to “A”)*
4) lithium Battery
(7.2V, 2200mAh)
5) CD-ROM Software (Viewer Application & Driver)
Please take a moment to familiarize yourself
with the location of the USB Bridge controls and
connection ports:
6) power indicator leD
7) power On/OFF Button
8) Battery Charge indicator leD
9) Battery Charger Base
10) power Connection port
(12V DC)
11) Camera Connection port
12) USB Connection port
(Type “A”)*
*Please note: Your USB Bridge package includes a specially
designed USB cable (Type “A” to “A”) for making the appropriate
USB connections. Using an aftermarket or different style of USB
cable (i.e. type “A” to “B”) may not be compatible with this device
and/or your PC without using a USB port adaptor, available from
most major electronics and computer retailers.
paCkage COntentS & COntROlS
transportation:
• This product is intended to be used as a portable
device. Please use care when connecting/discon-
necting cables and accessories.
• Use caution if you are repositioning the USB
Bridge a short distance across a desk or table.
Make sure you do not pull on any power cords or
connector cables which could cause damage to
the cables or input connections.
Care & Maintenance:
• Always turn the power OFF on the USB Bridge
when the system is not in use.
• To prolong battery life, remove the battery from
the USB Bridge if the system is not being used for
one week or more.
• If needed, clean the surface of the USB Bridge
with a soft damp cloth or an electrostatic dusting
wipe. DO NOT use liquid cleaners on the plastic
surfaces. No additional methods of sterilization or
cleaning are recommended or required.
Susceptibility to interference:
There may be temporary performance degradation
of the USB Bridge when subjected to a strong mag-
netic and/or radio-frequency field, electrostatic dis-
charge or transient electrical noise. An electrostatic
discharge (caused by static electricity) may cause
image distortion. If this happens, switch the unit off
and try moving the unit to a different location.