ENHANCED VISION USB Bridge, User Manual

Page: 7 / 20

12 13
C
hapter
5
S
oFtware
i
nStallation
C
hapter
6 H
ardware
i
nStallation
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 1
2. The installation should start
automatically. If not, you
may need to double-click on
the “ViewerSetup.exe” file
contained on the CD-ROM
(See Figure 2)
.
3. Once the Setup Wizard
appears on screen, click
on the “Next” button to
continue the installation
process (See Figure 3) .
4. Once the License Agree-
ment appears on screen,
click on the “I Agree” button
to continue the installation
process (See Figure 4) .
5. A different install location
may be chosen if desired.
For now, click on the
“Install” button to continue
the installation using the
default folder
(See Figure 5)
.
6. Once the installation has
fully completed, click on the
“Finish” button
(See Figure 6) .
IMPORTANT! It is highly recommended that you
install the included software before making the
hardware connections to your PC.
Do not connect the included USB cable or the
hardware interface to your PC until after the
software installation has completed. Failure to
follow these instructions may cause your PC to
“freeze” or cause the USB Bridge and software to
incorrectly function. Should you need assistance
installing the included software, please seek the
assistance of a trained computer specialist or
contact our technical support department.
(800) 440-9476 (US Office, toll-free)
(714) 465-3400 (outside the US)
evsupport@enhancedvision.com
1. If you are setting up the USB Bridge for the
first time, please insert
the lithium battery into the
charger base of the USB
Bridge so that it can fully
charge (See Figure 1) .
Although not required,
following this step will allow you to take full
advantage of the portability features of your
Enhanced Vision product, if desired.
Please refer to pages 20-21 for more infor-
mation regarding charging and using bat-
tery power.
HaRDWaRe inStalatiOn