ENHANCED VISION USB Bridge, User Manual

Page: 14 / 20

26 27
C
hapter
9
t
ipS For uSing tHe
uSB B
ridge
C
hapter
10 t
rouBleSHooting
Using Flipper ntSC/pal with the USB Bridge
• The Flipper is compatible with the USB Bridge
• Using a new, fully
charged lithium battery,
the USB Bridge will
supply portable power
to your Flipper for
approximately 3 hours*
• When using the Flipper
(reading mode), activate
the reading lamp switch to provide improved
image quality
Using Max with the USB Bridge
• The Max is compatible
with the USB Bridge.
• Using a new, fully
charged lithium battery,
the USB Bridge
will supply portable
power to your Max for
approximately 4 hours*
• Only color versions of the Max camera will
display color images when shown on the PC
display
*Estimated times only. Actual usage times will vary
based on the life cycle remaining on the battery.
• no camera image appears on screen
• Does you computer meet the minimum system
requirements? (page 5)
• Is the software for the USB Bridge installed
correctly? (pages 10-11)
• Is your Enhanced Vision product correctly
attached to the USB Bridge? (pages 12-13)
• Is the included USB 2.0 cable attached to the
USB Bridge and your PC? (pages 12-13)
• Check for power - is the Power LED on the USB
Bridge illuminated? (page 14)
• Video image is jagged and/or slow moving
• Does you computer meet the minimum system
requirements? (page 5)
• Be sure you are connected to a high-speed USB
2.0 port on your PC. (page 5)
• Camera images appear as Black & White only
• Is your Enhanced Vision product (Max) designed
to display color modes? (page 23)
• Use the Mode button on your Enhanced Vision
product to cycle through Color, Black & White or
Enhanced modes. Refer to the manual included
with your Enhanced Vision product for details.
• the battery will not power the camera
• Can you use AC power to power the camera?
(pages 13-14)
• Does the battery need to be charged? (page 21)
• Does the battery need to be replaced? (page 27)
tROUBleSHOOting