26
Smart Reader Shutdown
Please do not disconnect your Smart Reader from power until the Shutdown Sequence has
completed. If you have an attached monitor connected a message will display which lasts
about 10 seconds (The Green LED above the Power Button on the side of your Smart Reader
will Turn Off indicating it is safe to remove from power).
Shut Down
When your Smart Reader is not in use you may want to Power it OFF.
1.
Locate the Large Green Power Button (Located on the Right Hand Side of the Smart
Reader).
2.
Press This Button once to begin the Shutdown Sequence
3.
A message screen will display if you are attached to a monitor. This message states
‘Shutting down… wait until the green light is off’ before removing your Smart Reader
from a power source.
4.
WARNING: Avoid disconnecting the Smart Reader from power during this shut down
sequence. This may result in damage to your Smart Reader system if power is
spontaneously removed.
If your Smart Reader system is corrupted or fails to start due to Power Loss during a
shutdown please contact Technical Support and see “Smart Reader Recovery Utility”
(Page 28)
Summary of Contents for Smart Reader
Page 1: ...0 User Manual ...
Page 8: ...7 ...
