39
c. Press the number “9”, this will enter the handset
administration menu.
d. Press number “2”, handset enters system setting
menu.
e. Press number “1”, and enter the two-digit Handset ID
to be cleared.
f. Upon successful operation, the handset LCD will
display “Done”, otherwise it will show “Message not
received, try again”.
Notes:
1. De-registration by the administrator will disable a
handset’s ability to use the base station to make or
receive phone calls. This also frees up the ID for future
registration.
2. Handsets de-registered by the administrator can still
perform intercom to other handsets.
4. Obtain a Specific Handset ID:
a. If a particular Handset ID is preferred over
sequentially assigned ID, the administrator can “tell”
the base in advance what the next ID assignment
should be.
b. Press administrator handset Menu (Right) soft key.
c. Press the number “9”, this will enter the handset
administration menu.
d. Press number “2”, handset enters system setting
menu.
e. Press number “2”, and enter the two-digit Handset ID
to be assigned next by the base.
f. Upon successful operation, the handset LCD will
display “Done,” otherwise it will show “Message not
received, try again.”
g. If the handset ID is already in use by another
handset, the administrator will be alerted. In that
case, the administrator can choose another ID or
asks the handset having the desired ID to vacate by
de-registering with the base.
40
h. Perform registration immediately afterward for the
handset desiring a specific ID to ensure that the ID is
not taken by another handset.
Handset Group Subscription
1. Up to nine handset groups (1-9) can be defined and
handsets can decide which group(s) they want to be in.
2. For example, Group 1 represents the Customer Service
Group, Group 2 represents the Sales Group, and Group
3 is the Marketing Group. Suppose that Handset 10
wants to receive incoming rings for all Sales and
Marketing related calls in addition to calls addressed to
his/her own Handset ID. Then handset 10 will need to
“subscribe” to Group 2 and Group 3.
3. Group
Selections:
a. Press handset Menu (Right) soft key.
b. Press the number “5”, this will enter the handset
setting menu.
c. Press number “2”, handset enters group select menu.
d. Press ADD (Left) soft key and enter one-digit group
number (1-9) to add membership in a group.
e. Repeat for all desired groups.
f. Delete group selections by pressing DELETE (Right)
soft key and enter group number.
Notes:
1. The handset can change group affiliations at any
time.
2. The base (administrator) is not responsible for group
assignments. Consequently, it cannot de-subscribe
a handset from a group.
3. When an outside line or an intercom caller enters a
group ID, all handsets subscribed to this group will
ring. The first handset to answer will establish a link
with the caller. Afterward, it is a one-to-one call, not
