37
Advanced Operations
Handset Registration
1. If your handset(s) is purchased as part of a system, it
has been pre-registered with the base station at the
factory.
2. You need to register the handset with the base station in
the following situations:
a. If a handset displays a Handset ID “00,” that means
it is a new handset or the ID has been erased.
b. In certain situations, you may want to change a
handset’s ID. For example, you want to change a
particular handset from a user to an administrator (ID
10 or 11), or vice versa. Or in some rare occasions,
you find another handset having the same Handset
ID.
3. Registration:
a. Press handset Menu (Right) soft key.
b. Press the number “6”, this will enter the handset
registration menu.
c. Press and hold the base’s Registration (REG) button
for 2 seconds until the L1, L2, L3, and L4 LED come
on.
d. Press handset key “1”, this completes the
registration process. The base station will assign a
handset ID between 10 and 99. The assigned ID will
be displayed on the handset LCD, indicating
successful registration.
e. Repeat above steps for all additional handsets.
f. The first two handsets registered will be given ID 10
and 11, which gives them administrator privileges.
4. De-registration:
a. You can de-register a handset from a base. De-
registration will reset the Handset ID to 00, erase the
38
system security code, and free up the old ID for
future registration.
b. After deregistration, the handset will not be able to
use the base to make or receive phone calls, nor can
it intercom other handsets.
c. Press handset Menu (Right) soft key.
d. Press the handset number key “6”, this will enter the
handset registration menu.
e. Press and hold the base’s REG button for 2 seconds
until L1, L2, L3, and L4 LED come on.
f. Press the handset number key “2”, this completes
the de-registration process. Upon successful de-
registration, the handset will show ID “00”.
Notes:
1. The base has a 30 second registration timeout
starting from pressing the REG button. The handset
has a 12 second registration timeout starting from
the registration or de-registration option has been
selected. The base and handset will automatically
exit registration mode after timeout.
2. Repeat registration or de-registration process if
unsuccessful.
Advanced Registration:
1. Advanced registration functions can be performed by
administrator handsets (ID 10 and 11) only.
2. Administrator handsets can perform advanced
registration function as long as in range with the base
station. The base station does not need to be in
registration mode.
3. De-register a Handset ID by administrator:
a. Make sure that the administrator handset is within
the coverage range of the base station.
b. Press administrator handset Menu (Right) soft key.
