EnGenius ECB600 User Manual Download Page 94

Page: 94 / 98

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit

être installé et utilisé avec un minimum de 21cm de distance entre la source de rayonnement et votre corps.

This device has been designed to operate with a

diople

antenna have a maximum gain of

[5]

dB. Antenna having a higher gain is strictly prohibited

per regulations of Industry Canada. The required antenna impedance is 50 ohms.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for

the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This radio transmitter

(IC: 10103A-ECB600 / Model: ECB600)

has been approved by Industry Canada to operate with the antenna type, maximum

permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this user’s manual, having a gain

greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de

diople

antenne avec dB

[5]

. Une antenne à gain plus élevé

est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne requise est de 50 ohms.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain

maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l'intention

des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas

l'intensité nécessaire àl'établissement d'une communication satisfaisante.

Le présent émetteur radio

(IC: 10103A-ECB600 / Modèle: ECB600)

a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne

énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans

cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

Summary of Contents for ECB600



































































































Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands

EnGenius ECB600, User Manual

Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands