EnGenius ECB600 User Manual Download Page 60

Page: 60 / 98

Aggregation

Merges data packets into one packet. This option reduces the number of packets, but increases

packet sizes.

WMM Parameters

WMM (Wi-Fi Multimedia) manages the priority of audio, video and voice data over a Wi-Fi

network so that data from other applications are less likely to interfere with transmission. The

parameters CWmin, CWmax and AIFS together control the priority of the four access categories

(AC).

Note

: Only applicable in Access Point and WDS AP mode.

Client Limit

Check

Enable

and enter a number to limit the maximum client connection (The maximum is 127).

Note

: Only applicable in Access Point, WDS AP and Repeater mode.

Accept / Cancel

Click

to confirm the changes or

Cancel

to cancel and return previous settings.

Note:

WMM Parameters

is only applicable in Access Point and WDS AP mode.

Client Limit

is only applicable in Access Point, WDS AP and Repeater mode.

Summary of Contents for ECB600



































































































Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands

EnGenius ECB600, User Manual

Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands