EnGenius ECB600 User Manual Download Page 47

Page: 47 / 98

2.4G/5G Wireless Network (Client Bridge / WDS Station / Repeater mode)
Wireless Mode

Wireless mode supports 802.11b/g/n mixed mode in 2.4G and 802.11a/n mixed mode in 5G.

SSID

The SSID is a unique named shared amongst all the points of the wireless network. The SSID

must be identical on all points of the wireless network and cannot exceed 32 characters. You

may specify an SSID or select one from the

Site Survey

Click on

Site Survey

to search the existing Access Points.

Preferred SSID

Specify the SSID for the repeater. It can be different from Access Point’s SSID. (

Note:

Only in

Repeater mode)

Preferred BSSID

Specify the BSSID (Access Point’s MAC Address).

Wireless Security

The encryption is using. It must the same as Access Point’s encryption.

Accept / Cancel

Click

to confirm the changes or

Cancel

to cancel and return previous settings.

Summary of Contents for ECB600



































































































Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands

EnGenius ECB600, User Manual

Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands