EnGenius ECB600 User Manual Download Page 67

Page: 67 / 98

Management VLAN (Access Point / Repeater mode)
Profile Isolation

Restricted client to communicate with different VID by selecting the radio button.

VLAN ID

Specify the VLAN tag for each profile.

Management VLAN ID

If your network includes VLANs, you can specify a VLAN ID for packets pass through the Access

Point with a tag. Otherwise, select

No VLAN tag

Accept / Cancel

Click

to confirm the changes or

Cancel

to cancel and return previous settings.

Note:

1. If you reconfigure the Management VLAN ID, you may lose your connection to the ECB600. Verify that the DHCP server supports the

reconfigured VLAN ID and then reconnect to the ECB600 using the new IP address.

2. Clicking

does not apply the changes. To apply them, use Status > Save/Load (see section 5.1).

Summary of Contents for ECB600



































































































Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands

EnGenius ECB600, User Manual

Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands