EnGenius ECB600 User Manual Download Page 93 | Manualshive

Page: 93 / 98

background image

92

Appendix B – IC Interference Statement

Industry Canada statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet

aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu,

y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile

satellite systems;

(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars

could cause interference and/or damage to LE-LAN devices.

Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont reserves uniquement pour une utilisation a l’interieur afin de reduire les risques

de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux;

(ii) De plus, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-d.,

qu’ils ont la priorite) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages

aux dispositifs LAN-EL.

IMPORTANT NOTE: (For mobile devices usage)

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance 21cm between the radiator & your body.

NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)

Déclaration d'exposition aux radiations:

«
...
91
92
93
94
95
...
»

Summary of Contents for ECB600



































































































Reviews:

No comments

Related manuals for ECB600

Brand: Ublox Pages: 44

Brand: sauter Pages: 8

Brand: Cambium Networks Pages: 24

MAX-STREAM AX4500

Brand: Linksys Pages: 6

Brand: Billion Pages: 130

Brand: Silvercrest Pages: 20

Brand: Silvercrest Pages: 66

Brand: Symbol Pages: 100

ARS-7235-PSE-AC Series

Brand: ANTAIRA Pages: 24

Brand: HomeMatic Pages: 55

Brand: LG Innotek Pages: 12

Brand: Redline Communications Pages: 55

Brand: Intellinet Pages: 28

Brand: Sapido Pages: 108

Nttworks SR-A Series

Brand: Syscall Pages: 12

Brand: Ebyte Pages: 22

Brand: OutdoorRouter Pages: 9

Brand: Outdoor Router Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands