EnGenius ECB600 User Manual Download Page 78

Page: 78 / 98

SNMP
SNMP Enable/Disable

Enable or Disable SNMP feature.

Contact

Specify the contact details of the device

Location

Specify the location of the device.

Community Name (Read Only)

Specify the password for the SNMP community for read only access.

Community Name

(Read/Write)

Specify the password for the SNMP community with read/write access.

Trap
Trap Destination Address

Specify the IP address of the computer that will receive the SNMP traps.

Trap Destination Community

Name

Specify the password for the SNMP trap community.

SNMPv3
SNMPv3 Enable/Disable

Enable or Disable SNMPv3 feature.

User Name

Specify the username for SNMPv3.

Auth Protocol

Select the authentication protocol type:

MDS

SHA

Auth Key

Specify the authentication key for authentication.

Priv Protocol

Select the privacy protocol type:

DES

Priv Key

Specify the privacy key for privacy.

Engine ID

Specify the engine ID for SNMPv3.

Save/Apply / Cancel

Click

Save/Apply

to apply the changes or

Cancel

to return previous settings.

Summary of Contents for ECB600



































































































Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands

EnGenius ECB600, User Manual

Search results

Summary of Contents for ECB600

Reviews:

Related manuals for ECB600

Brands by name

Popular brands