74
Diagnostics
Target IP
Enter the IP address you would like to search.
Ping Packet Size
Enter the packet size of each ping.
Number of Pings
Enter the number of times you want to ping.
Start Ping
Click
Start Ping
to begin pinging target device (via IP).
Traceroute Target
Enter an IP address or domain name you want to trace.
Start Traceroute
Click
Start Traceroute
to begin the trace route operation.
Target Address
Enter the IP address of the target PC.
Time period
Enter time period for the speed test.
Check Interval
Enter the interval for the speed test.
Start Speed Test
Click
Start Speed Test
to begin the speed test operation.
IPv4 / IPv6 Port
EAP300 use IPv4 port 5001 and IPv6 port 5002 for the speed test.
Please run iperf server (iperf -s) in the target PC.
Summary of Contents for EAP300
