67
8.4
Backup/Restore
This page allows you to save the current device configurations. When you save the configurations, you also can reload the
saved configurations into the device through the
Restore Saved Settings from A File
section. If extreme problems occur, or
if you have set up the EAP300 incorrectly, you can use the
Factory Default
button in the
Revert to Factory Default Settings
section to restore all the configurations of the EAP300 to the original default settings.
Backup/Restore
Save A Copy of Current
Settings
Click
Backup
to save the current configured settings.
Restore Saved Settings
from A File
To restore settings that have been previously backed up, click
Browse
, select the file, and
click
Restore
.
Revert to Factory Default
Settings
Click
Factory Default
button to restore the EAP300 to its factory default settings.
Summary of Contents for EAP300
