40
Wireless Network (Repeater mode)
Wireless Mode
Wireless mode supports 802.11b/g/n mixed mode.
SSID
The SSID is a unique named shared amongst all the points of the wireless network. The SSID
must be identical on all points of the wireless network and cannot exceed 32 characters. You
may specify an SSID or select one from the
Site Survey
.
Site Survey
Click on
Site Survey
to search the existing Access Points.
Preferred SSID
Specify the SSID for the repeater. It can be different from Access Point’s SSID.
Preferred BSSID
Specify the BSSID (Access Point’s MAC Address).
Wireless Security
The encryption is using. It must the same as Access Point’s encryption.
Accept / Cancel
Click
Accept
to confirm the changes or
Cancel
to cancel and return previous settings.
Summary of Contents for EAP300
