53
WPS (Wi-Fi Protected Setup)
WPS
Select Enable or Disable the WPS feature.
WPS Current Status
Shows whether the WPS function is
Configured
or
unConfigured
.
When it is Configured, the WPS has been used to authorize connection between the device and
wireless clients.
Self Pin Code
The PIN code of this device.
SSID
The SSID (wireless network name) used when connecting using WPS.
Authentication Mode
Shows the encryption method used by the WPS process.
Passphrase Key
This is the passphrase key that is randomly generated during the WPS process. It is required if
wireless clients that do not support WPS attempts to connect to the wireless network.
WPS Via Push Button
Click this button to initialize WPS feature using the push button method.
WPS Via PIN
Enter the PIN code of the wireless device and click this button to initialize WPS feature using the
PIN method.
Summary of Contents for EAP300
