Spider® AT
User's Guide
P a g e 52
Revision: Draft
Figure 39 - HyperTerminal Program Window
TEST THE HYPERTERMINAL SETUP
1.
Make sure the cursor is in the main window.
2.
Type “
AT
” and press Enter
3.
The modem should respond back with “0” or “OK” in the Main Window
4.
If this happens, the COM port is configured correctly. If not, go back and
check your settings.
5.
At this point you are ready to start configuring your device with AT
commands. Section 3.2 of this guide provides details about configuring your
device.