08
Warning
！
Authorized service personnel must disconnect both AC and DC power from
the SolarLake Series inverter before attempting any maintenance or cleaning
or working on any circuits connected to the SolarLake Series inverter.
● Before using the SolarLake Series inverter, read all instructions and cautionary markings on
the SolarLake Series inverter, and all appropriate sections of this guide.
● Use only attachments recommended or sold by Samil Power. Doing otherwise may result in
a risk of fire, electric shock, or injury to persons.
● To avoid a risk of fire and electric shock, make sure that
existing wiring is in good condition
and that wire is not undersized. Do not operate the SolarLake Series inverter with damaged or
substandard wiring.
●
Do not disassemble the SolarLake Series inverter. It contains no user-serviceable parts. See
Warranty for instructions on obtaining service. Attempting to service the SolarLake Series
inverter user self may result in a risk of electric shock or fire and will void user warranty.
● To reduce the risk of electric shock, authorized service personnel must disconnect both AC
and DC power from the SolarLake Series inverter before attempting any maintenance or cleaning
or working on any circuits connected to the SolarLake Series inverter. Turning off controls will
not reduce this risk.
● Keep away from flammable, explosive materials to avoid fire disaster.
● The installation place should be away from humid or corrosive substance.
● To avoid electric shock accident, please do not disassemble the inverter because there are
high-voltage capacitances installed inside the inverter. Fatal High-voltage will remain in the inverter
after its disconnection with grid after 5 minutes.
● To reduce the chance of short-circuits, authorized service personnel must use insulated
tools when installing or working with this equipment.
Safety
