21
Start inverter
a. Turn on DC switch and AC grid.
b. Inverter will start up automatically when PV panels generate enough energy. when operating
normally, the LED and LCD will indicate normal information which means inverter starting up
successfully. If it is the first time start the inverter Please refer to chapter 6.1 .1 LCD commission
-ing setup operation steps, if it is not the first time start, find the inverter is malfunction, please refer to
chapter 8.1 troubleshooting table.
Note!
If inverter shows “Fault” status, please refer to Part 8 troubleshooting
6 Operation
6.1 Control and Display Panel(Figure 14)
Green LED
Red LED
LCD
Buttons
Figure 14 Display and control panel
There are 6 buttons:
OK, ESC, UP, DOWN, RIGHT, LEFT.
OK button:
confirm the selection.
ESC button:
exit current screen or selection
UP button:
move cursor to up selection or increase the values
DOWN button:
move cursor to down or decrease the values.
RIGHT button:
move cursor to right side or increase the backlight.
LEFT button:
move cursor to left side or decrease the backlight.
Installation&Operation
