15
5.3 Preparation
Below tools are needed before installation.
Figure 7 Installation tools
Installation Tools: crimping pliers for binding post and RJ45, screw drivers and manual wrench
and ø 8 driller, rubber hammer.
5.4 Installation Steps
Step1:
Drill holes in the wall with ø 8 driller according to the size of bracket. Keep drilling vertical
to the wall, and don’t shake when drilling to avoid damage to the wall. It need repositioning
and drilling holes if the hole with much error. Then put expansion pipe into the hole vertically,
use rubber hammer to tap the pipe into the wall completely. After that, 5 screws should be twisted
into pipes with bracket. See step 1.
Step 1
Step 2
Installation
