Enertex MultiSense KNX, Manual And Configuration

Page: 9 / 49

^SynOhrMultiSenseKNX-Eng-13.odt, 2014-05-06 Page 9 of 49
Picture 6: The SynOhr MultiSense KNX Display
The display options of the SynOhr MultiSense KNX room controller are shown in Picture 6 in the
overview. The display can be devided into the following areas:
•
Display of numerical values, time
•
Symbols
•
Dot matrix to the text display
Display of
numerical
Values
In addition to time up to five different values can be displayed alternately (time is parameterized)
are shown.
Symbol Description
– Time display: Colon
– Numerical value/temperature „
.
“ (Dot) according to the
numerical value
– For display of °C or °F: internally measured or externally
measured temperature, at external temperature additionally
extern -symbol.
– Clock symbol for indicating a time
– Lux display o the brightness value in Lux
– kLux display of the brightness in Kilolux
–
W
: Display of the measured value for white light
– R : Display of the measured value for red light
– G : Display of the measured value for green light
–
B : Display of the measured value for blue light
–
%
: Display of humidity
– dB : Display the measured sound pressure
Note: This measurement is not suitable for the monitoring of
hazardous noise
Display of
Symbols
The display of symbols is partly set due to the operating mode (heating, cooling, standby, etc.)
some are switchable via this group address.
Symbol Description
Enertex ® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - mail@enertex.de