ASSEMBLY AND USER MANUAL
SOLAR BLOCK ULTRA
35
A.
Unit state
The unit status can be set from Menu A based on the applicable selection.
1. The selected options can be:
•
ON (unit operating under defined conditions);
•
OFF (unit on standby);
•
Energy Saving (unit in energy save mode);
•
AUTO (unit in operation, but conditioned by the defined time setting)
The equipment control through the digital input functions as an enable, that is, if the digital input is
switched off (OFF status) the equipment can not be switched on in any other mode.
If the digital input is active (ON status) the equipment can be switched on or off through the console.
2. The selected options can be:
•
H DHW (central h domestic hot water);
•
ONLY DHW (only domestic hot water)
B.
Setpoint
Used to define the setpoint of the equipment operation in cooling mode, heating mode, sanitary hot
water and in energy save mode.
The following figures show only the information regarding the unit setpoint.
C.
Timer (time setting)
The controller is equipped with an internal battery backup clock that stores the time and date for all
associated functions. The time setting is defined from the following menus:
•
1
st
step (C01). Internal clock setting/adjustment;
1.
2.
