ASSEMBLY AND USER MANUAL
SOLAR BLOCK ULTRA
18
In the event of some other positioning of the panels, you must contact our Technical
Department.
6.2.8.
Fixation
The affixation of panels depends on the installation site and the method and type of affixation is the
installer’s decision. H
owever, you must bear various factors in mind (described above such as, for
example, distance, orientation…).
For a correct affixation of the panels, as regards the physical part of the affixation supports they must
have a sturdy structure in line with the circumstances of the site. Each panel must be secured at 6
points (as a minimum).
The image below illustrates an example of the fixation used:
The fixation of the panels is
ensured by aluminium brackets*. The support is bent in “L” shape with two
M8 through holes. The bracket base is secured to the roof (where applicable) using an M6 screw and a
plastic plug or a female thread (depending on the situation).
The other support rib is secured to the panel by way of galvanised M6 screws to prevent corrosion
situations.
* The aluminium brackets are not supplied with the SB
The Panels must have a minimum gap of 50cm (from the previous and/or subsequent
panel)
