Energie AQUAPURA SPLIT 160i, Technical Manual

Page: 38 / 108

38
AQUAPURA SPLIT
English
Technical Manual
1. INTRO
1.1. Symbols
1.2 .Pre-installation Information
Every process that the supplier believes to be conducive to harmful danger and/or
material damage will be signaled with a danger sign.
To better characterize the danger, the symbol will be followed by one of these words:
• DANGER : when there is the possibility of harm to the operator and/or people in
the vicinity of the equipment;
• WARNING : when there is the possibility of material damage to the equipment
and/or attached materials.
All the information that the supplier believes to be an asset for better performance
and preservation of the equipment, will be signaled together with the information
sign.
The electrical installation of the equipment must comply with the national regulations for electrical
installations in effect.
O
AQUAPURA SPLIT
will only operate after receiving its load of coolant.
The power supply is 230V, 50Hz.
If the power supply cable is damaged, it must be replaced by the manufacturer, by its customer ser -
vice, or by staff with similar training in order to avoid any danger.
AQUAPURA SPLIT
will only operate if the storage water heater is filled with water.
These assembly instructions must be read before start up!
The AQUAPURA SPLIT heat pump is only suitable for heating potable water within the specified
temperature range!
The heating of other liquids such as industrial water is not allowed.
Technical regulations for installing potable water (DIN 1988) must be taken into account.
When working with AQUAPURA SPLIT , it should always be disconnected from an electrical source.
This device can be used by 8 year old children and older, or people with physical, censorial or mental
handicaps, or lacking experience / knowledge, if they received training regarding the running of the
device in a safe way and are aware of the dangers involved.
WARNING / DANGER