
61
AQUAPURA SPLIT
6.4. End of System Life
When the product is at the end of its life, the equipment should be dismantled by a qualified installer or
plumber and/or electrician (if necessary). All the material used in this equipment may be disposed of at
the closest recycling centre. Please inquire about the regulations of the recycling centres closest to you.
7. TABLE OF ERRORS
In the event of an anomaly and a possible assistance request the error code is important to effectively
trace the problem.
In case of anomaly the control panel displays a message with a corresponding code:
In case of an anomaly and before requesting assistance, please
do the following:
1.
Turn off the power and turn it on again
.
2.
The device restarts and starts up automatically
;
3.
If the error code persists, request for assistance
.
Code
Description
Problem / Cause
Corrective action
E2
Communication error be
-
tween the outside unit and
the display;
Communication failure be
-
tween outside unit and the
display.
Check connection and condi
-
tion of cable.
Damaged display.
Change display.
E4
Temperature sensor error T5L
– heater cylinder sensor.
Communication failure.
Check connection and condi
-
tion of cable.
Damaged sensor.
Replace sensor.
E5
Temperature sensor error T3
– Evaporator sensor.
Communication failure.
Check connection and condi
-
tion of cable.
Damaged sensor.
Replace sensor.
Eb
Temperature sensor error T4
–Environment sensor.
Communication failure.
Check connection and condi
-
tion of cable.
Damaged sensor.
Replace sensor.
E9
Temperature sensor error
Th – Aspiration temperature
sensor.
Communication failure.
Check connection and condi
-
tion of cable.
Damaged sensor.
Replace sensor.
EA
Temperature sensor error Tp
– Compressor discharge tem
-
perature sensor.
Communication failure.
Check connection and condi
-
tion of cable.
Damaged sensor.
Replace sensor.
Ep
Electrical differential error.
Ground current break.
Check wiring.
P1
High pressure error – Active
high pressure switch.
Heater cylinder without water.
Check if the heater cylinder is
running out of water or if there
is a water leak.
Valves closed on the outside
unit.
Check that the valves are open.
Folded cold circuit pipe.
Check piping.
Excessive coolant.
Check the amount of coolant.
English
Technical Manual
Summary of Contents for AQUAPURA SPLIT 160i
