Energetics POWER RUN 1010HRC, Owner'S Manual

Page: 27 / 145

27
ERROR
CODE
PROBLEM POSSIBLE CAUSES CORRECTION
E 3
1. The console
could not
obtain the
incline value
within certain
time.
2. The incline
motor is
working
outside its
parameters.
1. Data jack has a poor
connection.
2. Incline motor has become
damaged (internal
damage may be evident
by excessive motor case
heat).
3. Data cable has been
damaged.
4. Controller is burnt.
1. Re-insert the wiring jack
and ensure that a firm
connection is made.
2. Reset the height of the
incline nut and restart
the machine.
3. Replace the incline
motor.
4. Replace the controller.
Ensure there is adequate clearance between
the incline nut and motor cast. Replace the incline motor if the associated
fuse blows under constant operation.
Thoroughly inspect the data cable to ensure
that the wiring has not been damaged.
ERROR
CODE
PROBLEM POSSIBLE CAUSES CORRECTION
E 5
No heart rate signals
within 20 seconds
when using Body Fat
program. 1. Misplaced gesture on
hand pulse sensors.
2. Hand pulse sensors
are faulty or damaged.
1. Try again with
appropriate gesture.
2. Replace the hand pulse
sensors.