Energetics POWER RUN 1010HRC, Owner'S Manual

Page: 17 / 145

17
SAFETY KEY :
The monitor can be operated only with the key attached to the treadmill. The monitor shuts
off and the treadmill stops when this key is removed.
MAJOR FUNCTION KEYS
Power :
This key brings power to the treadmill and must be pressed before any other key.
Start / Stop :
Starts or stops the treadmill belt.
Enter :
This key confirms the selection of a program and the speed and incline values during the
setting of a user program. When the LCD power is off, press Enter until it beeps to switch the
distance from Metric to Imperial or Imperial to Metric.
Select :
Press this key to choose one of the preset and user programs. During workout, press this
key to switch display from Calories to Elevation Gain. When the LCD power is off, press
Select until it beeps twice to clear the value set by user.
Speed + :
Increases the speed. Press this button once to increase the speed level by 0.2 KPH(0.1
MPH). Hold the button down for two seconds or longer to quickly reach the desired speed
level. This button is also used to choose between programs.
Speed - :
Decreases the speed. Press this button once to decrease the speed level by 0.2 KPH(0.1
MPH). Hold the button down for two seconds or longer to quickly reach the desired speed
level. This button is also used to choose between programs.
I :
Increases the incline. Press this button once to increase the incline level by 1%. Hold the
button down for two seconds or longer to quickly reach the desired incline level. This button
is also used to choose between programs.
Incline - :
Decreases the incline. Press this button once to decrease the incline level by 1%. Hold the
button down for two seconds or longer to quickly reach the desired incline level. This button
is also used to choose between programs