4
UV-MAX Safe Operation Procedure
1. Always wear personal protective equipment (PPE) when operating UV-MAX to limit
exposure to light
2. Place UV-MAX in area to be treated
3. Ensure the PIR Sensors (Passive Infrared) are positioned to the re-entry point. PIR
sensors operations are explained in the FAQ section at the end of this manual.
4. Connect UV-MAX to 120vac plug receptacle
5. Press start on UV-MAX control and exit treatment area
6. Adhere to recommended safety precautions to avoid potential injury
Safety
1. You should never look directly at a UV lamp in operation without wearing approved
safety glasses. Safety glasses should be made of any material other than Quartz or
Teflon.
2. The space should be vacant and closed prior to UV-MAX operation
3. Never command the system on when the treatment space is occupied
Summary of Contents for UV MAX Low Profile
Page 2: ...2...
