11
Cycle Stop Status Screens
Cycle stop displays for normal system operation are covered on this page.
Emergency Stop
Should cycle deactivation occur by engagement of the Emergency Stop button, the following
method will be required to reset the system:
1. Observe Emergency Stop Active status on control screen
2. Release Emergency Stop by pulling up on the red knob
3. Select HOME button to return to main screen
4. Press START CYCLE to resume normal operation of system
System Faults
Should cycle deactivation occur by means of a system fault, the following method will be
required to reset the system:
1. Observe the fault status type on the control panel
2. Ensure all system faults have been properly addressed
3. Select HOME button to return to main screen
4. Press START CYCLE to resume normal operation of system
Summary of Contents for UV MAX Low Profile
Page 2: ...2...
